waves ssl e channel wont install communication error

High efficiency is achieved through Zero Voltage Switching (ZVS) on the half-bridge converter and Zero Current Switching (ZCS) on the synchronous rectifier. Microchip’s 200W DC/DC LLC Resonant Converter Reference Design operates over a wide input voltage range (350 - 420Vdc) with a nominal input of 400V, providing a 12V DC output, while maintaining high-voltage isolation between the primary and secondary. More details are provided in the SENT Interface section. The SYNC pulse is transmitted at the start of every packet. The system clock rate is determined by measuring the SYNC pulse. The data is measured as falling edge to falling edge, and the duration of each pulse is related to the number of system clock ticks. An EMC filter is provided on the SENT output circuit as recommended in Section 6.3.1 of the SENT protocol (SAE J2716 Standard). This digital output pin is then level shifted externally to 5 V using an external NPN transistor. The single edge nibble transmission (SENT) interface to the host is implemented by using a timer to control a digital output pin. When the ADC input programmable gain amplifier (PGA) is configured for a gain of 32, the noise-free code resolution of the ADuC7060/ ADuC7061 is greater than 18 bits. In the source code, an ADC sampling rate of 4 Hz was chosen. As an extra option, the ADT7311 digital temperature sensor can be used to measure the cold junction temperature instead of the RTD. The RTD is used for cold junction compensation.

In the circuit, the ADuC7060/ ADuC7061 are connected to a thermocouple and a 100 Ω platinum resistance temperature detector (RTD). The ADuC7060/ ADuC7061 integrate dual 24-bit sigma-delta (Σ-Δ) analog-to-digital converters (ADCs), dual programmable current sources, a 14-bit digital-to-analog converter (DAC), and a 1.2 V internal reference, as well as an ARM7 core, 32 kB flash, 4 kB SRAM, and various digital peripherals such as UART, timers, serial peripheral interface (SPI), and I2C interfaces.

This circuit uses the ADuC7060 or the ADuC7061 precision analog microcontroller in an accurate thermocouple temperature monitoring application.

Waves ssl e channel wont install communication error